ScenesA scene helps you to find the right colour and lightingsettings for the current environment. The settings ofeach scene have been set according to a certain styleor environment.To change the scene, select Scene modes in thetoolbar.To make your own scene, scroll to User defined, andselect Options > Change.To copy the settings of another scene, select Based onscene mode and the desired scene.To activate your own scene, select User defined >Select.Capture images in asequenceTo capture several images in a sequence, if enoughmemory is available, select Sequence mode in thetoolbar and press the capture key.The captured images are shown in a grid on the display.To view an image, scroll to it and press the scroll key.If you used a time interval, only the last image is shownon the display, and the other images are available inGallery.To send the image, select Options > Send.To send the image to a caller during an active call, selectOptions > Send to caller.To switch off the sequence mode, select Sequencemode > Single shot in the toolbar.View captured imageThe image you captured is automatically saved inGallery. If you do not want to keep the image, selectDelete from the toolbar.Select from the following toolbar items:• Send — Send the image to compatible devices.• Send to caller — Send the image to the callerduring an active call.• Post to — Send the image to your compatibleonline album (network service).To use the image as the background image, selectOptions > Set as wallpaper.To add the image to a contact, select Options > Setas contact call img. > Assign to contact.Record videos1. If the camera is in the image mode, select the videomode from the toolbar.2. To start recording, press the capture key.3. To pause recording at any time, select Pause. SelectContinue to resume recording.4. To stop recording, select Stop. The video clip isautomatically saved in Gallery. The maximumlength of the video clip depends on the availablememory. 105 Media
