Nokia E90 Software Manual

Also see for E90 Communicator: User guide Specification sheet User guide Brochure User guide

Contents

Nokia E90 Software Manual Manual pdf 5 page image

Introduction5Copyright © 2007 Nokia. All rights reserved.Positioning methods and serverThe integrated GPS receiver of your Nokia E90Communicator may have difficulties providing reliablepositions in some environments. Therefore it is suggestedthat before using Nokia Maps you also activate theAssisted GPS (A-GPS) that uses assistance servers withgood satellite signal to provide positioning information.To set the active positining methods:1 Select > Tools > Settings > General > Positioning >Positioning methods.2 Select the methods you want to use by scrolling to themethod and selecting Options > Enable. Make sure haveAssisted GPS and Integrated GPS enabled.3 Select Back to accept the settings.In addition to the positioning methods, set also thepositioning server used to access GPS data.1 Select > Tools > Settings > General > Positioning >Positioning server.2 In Access point, press the scroll key and select an accesspoint that is available in the environment where youplan to use Nokia Maps. Note that a wireless LANaccess point is usually not ideal for navigating.In Server address, press the scroll key and type in theaddress of your positioning server. The default serveris supl.nokia.com.3 Select Back to accept the settings.