Nokia ESERIES E66 User Manual

Also see for E Series: User guide User guide User guide User guide User guide

Contents

Nokia ESERIES E66 User Manual Manual pdf 126 page image

• Authentication type — Select Open or Shared.• WEP key settings — Edit the settings for the WEP key.WEP key settingsIn an ad-hoc network, all devices must use the same WEP key.Select WLAN security settings > WEP key settings andfrom the following:• WEP encryption — Select the desired WEP encryption keylength.• WEP key format — Select whether you want to enter theWEP key data in ASCII or Hexadecimal format.• WEP key — Enter the WEP key data.802.1x security settingsSelect 802.1x as the WLAN security mode.802.1x authenticates and authorises devices to access awireless network, and prevents access if the authorisationprocess fails.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used for deviceidentification).• EAP plug-in settings — If you selected WPA/WPA2 >EAP, select which EAP plug-ins defined in your device touse with the access point.• Pre-shared key — If you selected WPA/WPA2 > Pre-shared key, enter the shared private key that identifiesyour device to the WLAN to which you connect.WPA security settingsSelect WPA/WPA2 as the WLAN security mode.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used for deviceidentification).• EAP plug-in settings — If you select WPA/WPA2 >EAP, select which EAP plug-ins defined in your device touse with the access point.• Pre-shared key — If you select WPA/WPA2 > Pre-shared key, enter the shared private key that identifiesyour device to the WLAN to which you connect.• WPA2 only mode — To allow both TKIP and AES(Advanced Encryption Standard) encryption, select Off. Toallow AES only, select OnWireless LAN pluginsSelect Menu > Tools > Settings > Connection > Accesspoints.The EAP (extensible authentication protocol) plug-ins areused in wireless networks to authenticate wireless devicesand authentication servers, and the different EAP plug-insmake possible the use of various EAP methods (networkservice).You can view the EAP plug-ins currently installed in yourdevice (network service).© 2010 Nokia. All rights reserved.126