To use the image as wallpaper in the active standby,select Options > Set as wallpaper.To set the image as a call image for a contact, selectOptions > Set as contact call img. > Assign tocontact.To return to the viewfinder to capture a new image,press the capture key.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do notuse the flash on people or animals at close range.Do not cover the flash while taking a picture.The camera of your device has an LED flash for lowlight conditions. The following flash modes areavailable for the still image camera: Automatic( ), Red-eye ( ), On ( ), and Off ( ).To change the flash mode, in the active toolbar,select the desired flash mode.ScenesScenes are only available in the main camera.A scene helps you to find the right colour andlighting settings for the current environment. Thesettings of each scene have been set according to acertain style or environment.The default scene in the image mode is Auto, andin the video mode Automatic (both indicated with).To change the scene, in the active toolbar, selectScene modes and a scene.To make your own scene suitable for a certainenvironment, scroll to User defined, and selectOptions > Change. In the user defined scene youcan adjust different lighting and colour settings. Tocopy the settings of another scene, select Based onscene mode and the desired scene. To save thechanges and return to the scenes list, press Back.To activate your own scene, scroll to Userdefined, press the scroll key, and select Select.Capture images in a sequenceThe sequence mode is available only in the maincamera.To set the camera to capture images in sequence (ifenough memory is available), in the active toolbar,select Sequence mode.To start capturing images in a quick sequence,selectBurst, and press and hold the capture key. Thedevice captures images until you release the key or69 Camera
