until the memory runs out. If you press the capturekey briefly, the device captures six image in asequence.To capture two or more images in defined intervals,select the desired time interval. To capture theimages, press the capture key. To stop capturingimages, select Cancel. The number of images takendepends on the available memory.The captured images are shown in a grid on thedisplay. To view an image, press the scroll key. If youused a time interval, only the last captured image isshown on the display.You can also use the sequence mode with the self-timer.To return to the sequence mode viewfinder, pressthe capture key.To switch off the sequence mode, in the activetoolbar, select Sequence mode > Single shot.You in the picture—self-timerThe self-timer is available only in the main camera.Use the self-timer to delay the capture so that youcan include yourself in the picture.To set the self-timer delay, in the active toolbar,select Self timer > 2 seconds, 10 seconds, or 20seconds.To activate the self-timer, select Activate. Thedevice beeps when the timer is running and thequadrangle blinks just before the image capture.The camera takes the picture after the selecteddelay elapses.To switch off the self-timer, in the active toolbar,select Self timer > Off.Tip: In the active toolbar, select Self timer >2 seconds to keep your hand steady whentaking a picture.Tips on taking good photographsPicture qualityUse the appropriate picture quality. The camera hasseveral picture quality modes. Use the highestsetting to make sure that the camera produces thebest picture quality available. Note however, thatbetter picture quality requires more storage space.For multimedia message (MMS) and e-mailattachments it may be necessary to use the smallestpicture quality mode optimised for MMS sending.You can define the quality in the camera settings.See "Still image camera settings", p. 73.BackgroundUse a simple background. For portraits and otherpictures with people, avoid having your subject in70 Camera
