14 Working with VPNs164 Nokia IP40 Security Platform User’s Guide v1.1NoteTo allow authenticated users to access your internal network without restriction, andbypass NAT, select Unrestricted access.Configuring Remote Access VPNsThe following sections describe about how to configure a remote access VPN and VPN site.To configure a remote access VPN1. Click VPN in the main menu, and click the VPN Sites tab.2. Click New Site at the bottom of the page.3. The IP40 VPN site wizard appears.If you select Remote Access VPN, the VPN Network Configuration dialog box appears.To configure a remote access VPN site1. Enter the IP address of the VPN gateway.2. Do one of the following: To obtain the network configuration by downloading it from the VPN site, selectDownload Configuration. This option automatically configures your VPN settings bydownloading the network topology definition from the VPN server.NoteYou can download the network configuration only if you are connecting to a Check PointVPN-1 or Nokia IP40 Security Platform. To provide the network configuration manually, select Specify Configuration. To route all network traffic through the site, including Internet traffic, select Route AllTraffic in the GUI wizard.This option increases network security. For example, if your VPN consists of a central officeand a number of remote offices, and the remote offices are allowed to access the Internetresources through the central office only, you can choose route all traffic from the remoteoffices through the central office.NoteYou can configure only one VPN site to route all traffic.3. Click Next.The following happens in this order:
