Nokia IP560 - Hard Disk Drive Based Installation Manual

Also see for IP560 - Hard Disk Drive Based: Installation guide

Contents

Nokia IP560 - Hard Disk Drive Based Installation Manual Manual pdf 107 page image

Replacing the BatteryIP560 Security Platform Installation Guide 1074. For more detailed information about the power supply status, click Power Supply.Replacing the BatteryTo replace the battery, you need the following: The appropriate Nokia battery replacement kit for your appliance Physical access to the appliance A Phillips-head screwdriver A grounding wrist strap (Optional) Safety glassesWarningRisk of explosion if battery is replaced by an incorrect type. Replace the battery only with thesame or equivalent type that the manufacturer recommends. Dispose of used batteriesaccording to the manufacturer's instructions.WarningMake certain to remove the power cord from the appliance before you proceed with any ofthe following steps. Failure to do so could cause electric shock with burns or death resultingfor the user.CautionMake certain that you are properly grounded when you handle components internal tothe appliance to protect against electrostatic discharge damage to the appliance. Usethe grounding strap included in the battery replacement kit.To install the battery, perform the following tasks:1. Use Nokia Network Voyager or the command-line interface (CLI) to perform an orderlyshutdown of the IP560.For information about how to access Network Voyager and the related reference materials,see “Using Nokia Network Voyager” on page 42.2. Turn off the power to the IP560 appliance.3. Loosen the front panel retaining screws.