Nokia MEDIA MASTER 211S User Manual

Nokia MEDIA MASTER 211S User Manual Manual pdf 11 page image

GB 11Remote controlPress once to turn the sound off/on (mute). Press and holdfor a few seconds to switch the Mediamaster in and out ofstand-by mode.0 - 9 Change the channel and select individual menu options.Note: If 0 is entered as the first digit, the TV Release func-tionality is activated (see below).0 TV Release. To switch between digital TV/Radio, analogueTV and analogue satellite TV and VCR.info To display short and extended information (if transmitted)about current and forthcoming programmes. Shows theviewing banner in viewing mode.back Go back one level at a time within menus without storing anysettings. To toggle between the current and previous TV/Ra-dio channel in viewing mode. Close the NaviBars.select Confirm choices and the selection of a highlighted item.Open the NaviBars.opt Show service options in viewing mode.txt Press to show teletext (if available).This section describes how to operate the Mediamaster using the buttons on the remote control. Thestand-by button has double functionalitys. One function is performed if you gently press the button onceand the other function is performed if you hold the button down for a few seconds.Some of the functions can also be performed using the buttons on the front panel.Cursor upMove up through the menusand change to the next chan-nel in the current channel listwhile in viewing mode.Cursor downMove down through themenus and change to theprevious channel in the cur-rent channel list while inviewing mode.Cursor leftMove left/change set-tings in menus.Decrease the volumelevel while in viewingmode.Cursor rightMove right/change settings inmenus.Increase the volume level whilein viewing mode.The Mediamaster’s maximumvolume level is controlled by theTV’s present volume setting.The cursor button