GB 13You can use manual channel search if you want to add newchannels later. For example If you have a special antennaconfiguration which is not assigned in the “Antennaalternative” menu, you can add new channels using the“manual channel search” function. When you perform aManual Search you first need to enter some parameters for thechannel search to work. The information you need to enter inthis menu is available in magazines covering satellite TVreception, on the Internet or from your Service Provider.Antenna Alternative: Select Antenna Alternative “1 to 16” that corresponds to the antenna whichyou wants to use for the search.Transponder Freq (MHz): Specify the frequency in GHz. using the numbered buttons on yourremote control. If you enter the wrong number, erase it with the left arrow button.Polarization: Select polarization; “Horizontal” or “Vertical”.Symbol Rate (Msym/S): Enter the rate with the numbered buttons.FEC: Enter the appropriate Forward Error Correction (FEC) value or select “Auto”.Network Search: Select: “Yes” to search from alltransponders used by a specific Service Provider.(“Yes” is the default setting). Select “No” to search only fromthe transponder that you have entered on the line“Transponder Frequency”. (Useful if you do not want tosearch through all transponders for a specific programdistributor).By pressing the OK button you can now enter the channelsearch menu where the Mediamaster starts to search forchannels from the satellite.The following will describe the basic functions of your Mediamaster while watching TV or listening toradio channels.Sometimes the information may not be displayed as illustrated. Many of the functionsdescribed here are dependent on the Service Provider and/or can only be used if they areincluded in the transmitted programme information.Please note that during the Channel Search procedure, the Mediamaster has downloaded ALLavailable channels. This may include channels from various Service Providers, also those to whichyou normally do not have access. If you select a programme to which you do not have access, youwill get the message “Service is scrambled or not running” on the screen.Manual Channel SearchVIEWING TVGeneral Information