Nokia MEDIAMASTER 9400S Owner's Manual

Nokia MEDIAMASTER 9400S Owner's Manual Manual pdf 6 page image

GB 6Installing the satellite dishü Your satellite dish should be installed with a cable for youto connect to the Mediamaster. If you do not have this cableyou will need to buy one from a dealer (tell the dealer youneed a coaxial cable and F-connectors).ü Connect the cable from the satellite dish to the socketmarked ”LNB IN” on the back of the Mediamaster.If you need to fit the F-connectors onto the cablePrepare each end of the cable as shown in the diagram.You will need to fold back the outer braid (as shown).ü Slide the F-connector onto the cable, and then turn itclockwise until it grips the braid.ü Ensure that 3 mm of the core is protruding from the end ofthe connector.There are many different types of TV/VCR and otherequipment that you can connect to the Mediamaster. In thismanual you will see some of the most common ways toconnect your equipment. If you use RF cables you willhave to tune your TV and VCR to the Mediamaster outputchannel. If you have problems with your connections andneed help, contact your dealer or Service Provide.ü Connect the SCART cable between the main SCARTsocket on the TV and the TV SCART socket on theMediamaster.ü Connect an RF cable from the TV/VCR output on theMediamaster to the RF input socket on the TV.ü Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.15mm8mmF-connector3mmConnecting the Mediamaster to the satellite dishConnecting the Mediamaster to a TV set