Personalise your device Profiles—set tonesTo set and customise the ringing tones, message alerttones, and other tones for different events, environments,or caller groups, press , and select Tools > Profiles. If thecurrently selected profile is other than General, the profilename is shown at the top of the display in the standbymode.To change the profile, press in the standby mode.Scroll to the profile you want to activate, and select OK.To modify a profile, press , and select Tools > Profiles.Scroll to the profile, and select Options > Personalise.Scroll to the setting you want to change, and press toopen the choices. Tones stored on a memory card areindicated with . You can scroll through the tone listOffline profileThe Offline profile lets you use the device withoutconnecting to the wireless network. When you activate theOffline profile, the connection to the wireless network isturned off, as indicated by in the signal strengthindicator area. All wireless device signals to and from thedevice are prevented. If you try to send messages, they areplaced in the outbox to be sent later.Warning: In the offline profile you cannot make orreceive any calls, except make calls to certainemergency numbers, or use other features thatrequire network coverage. To make calls, you mustfirst activate the device function by changingprofiles. If the device has been locked, enter thelock code.To leave the Offline profile, press , and select another
