Camera and GalleryYou can also use the sequence mode with the Activateself timer. See “You in the picture—self-timer”, p. 27.If the self-timer is activated, a maximum of six picturescan be captured.The pictures are automatically saved in Gallery.You in the picture—self-timerUse the self-timer to delay the taking of a picture so thatyou can include yourself in the picture. To set theself-timer delay, select Options > Activate self timer >10 seconds, 20 seconds, or 30 seconds. To activate theself-timer, select Activate. The self-timer indicator ( )blinks and the device beeps when the timer is running.The camera takes the picture after the selected delay haselapsed. You can also use the Activate self timer in thesequence mode. See “Take pictures in a sequence”, p. 26.Select Options > Image setup > Flash > On/forced to usethe flash.If the flash is set to Off or Automatic during brightconditions, the flash still emits a low light when an imageis captured. This allows the subject of the picture to seewhen the picture is taken. There is no flash effect on theresultant picture.Adjust still image camera settingsThere are two kinds of settings for the still image camera:Image setup settings and main settings. To adjust Imagesetup settings, see “Adjust color and lighting”, p. 28.The setup settings return to the default settings after youclose the camera, but the main settings remain the sameuntil you change them again. To change the main settings,select Options > Settings and from the following: