GB 4Remote controlThis section describes how to operate the Mediamaster using the buttons on the remote control.mute Press once to turn the sound off/on (mute/unmute).Press and hold for a few seconds to switch theMediamaster into standby mode. In addition,press this button to switch the Mediamaster on.ok To confirm a selection.To open Navi Barscursor up Move up in the menus and change to the next channel inviewing mode.cursor down Move down in the menus and change to the previouschannel in viewing mode.cursor left Move left/change settings in menus.Decrease the volume level in viewing mode.cursor right Move right/change settings in menus.Increase the volume level in viewing mode.opt While watching TV: Pressing the opt button will give a menufrom which you can make some temporary settings.When the Navi Bars are visible: Pressing the buttonactivates the Options menu.info Three different functions:Pressing once will show current programme name.Pressing twice will show information about the currentand next programme.Pressing three times will give the 7-day programme guide(EPG).back To go back one level at a time within menus.To close the Navi Bars.Toggle between the present and previous channel.0 - 9 To change the channel and to select individual menuoptions.NOTE: If 0 is entered as the first digit, the TV Releasefunctionality is activated (see below).0 To toggle between the Mediamaster reception or anyother reception to your TV (depending of TV model.)navi To open and close the Navi Bars.txt Press to enter Teletext (if available).tv/radio Toggle between TV and radio mode.