Nokia Mediamaster 9828 Owner's Manual

Nokia Mediamaster 9828 Owner's Manual Manual pdf 14 page image

GB 14FIRST TIME INSTALLATIONChannel SearchThe Channel Search procedure can be performed in two differ-ent ways: Automatic Search or Manual Search.Manual Search *When you perform a Manual search you first need to enter someparameters for the channel search to work.The information you need to enter in this menu is available fromyour Service Provider.Frequency: Enter the frequency . If you enter the wrong figure(s),erase with the button.Transmission Mode: Select 2k or 8k.Guard Interval: Select one of the available alternatives.Network Search: Select Yes if you want to search on all frequen-cies in a specific network.• Press OK to start searching for channels. (See Channel SearchProgress” on the next page.)Automatic Search *• Start the Automatic search on by pressing OK.* Frequency OffsetSelect No and only the standard, fixed, channel frequencies willbe used at the search procedure. Under normal circumstancesthis will be quite sufficient. Select Yes when you want the searchprocedure to be more accurate. The fixed channel frequency willstill be searched, but this time with two extra steps; ± 167 kHzfrom the fixed frequency. NOTE! You have to select Yes or Nobefore you start the search procedure.RF modulator typeIf the Mediamaster is connected to the TV with a RF cable, youmust select the right RF modulator alternative, which is depend-ent on the country where the Mediamaster is being used.Select Normal (PAL B/G) for all countries except the UK.Select UK (PAL I) when the box is used in the UK.If you get picture but no sound, the RF modulator selection mightbe wrong.