Nokia Mediamaster 9860 S Owner's Manual
                                          | |
Contents
| 
GB 16Line on the Antenna Satellite SelectionMenuOne Antenna/One LNB ConfigurationSelect this alternative if you have one LNB mounted on the an-tenna and you want to select another, not preprogrammed, sat-ellite.LNB TypeSelect the local oscillator (L. O.) frequency valid for the presentLNB. The most common values, including Universal LNB, DiSEqCU, and C band are selectable with the buttons.You can also enter a value with the numeric buttons when thesymbol for the remote control is visible on the line.SatelliteSelect one of the preprogrammed satellites.This selection is necessary only if your satellite choice differsfrom the preprogrammed satellite alternatives in the followingways; if you do not use a universal LNB or when you have morethan two LNB’s.Predefined ChannelSelect one of the preprogrammed channels and adjust your an-tenna according to the “Antenna Adjustment and SignalCheck” section on page 14.OKFIRST TIME INSTALLATION7Please follow the procedure de-scribed on page 14.OKLNB Offset voltageIf the cable down from the antenna is very long, the voltage atthe LNB could be too low to change the polarization. You can in-crease the voltage to the LNB by 0,5 V. OK |
Related manuals for Nokia Mediamaster 9860 S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine