Nokia MetroHopper User Manual
                                                                                                                                   | |
Contents
| 
Commissioning Nokia MetroHopperDN99611394 © Nokia Networks Oy 13 (42)Issue 2-0 enNoteNoteClick Report to see a more detailed commissioning report for each outdoorunit. The commissioning report contains, for example, the measuredinterference level of the selected channel, and the fading marginmeasurement.Click Next to return to the Nokia BTS Manager Commissioning Wizard.2.3 Commissioning with Nokia MetroHub ManagerNokia MetroHub Manager contains Commissioning Wizard, which facilitates thecommissioning process. Commissioning Wizard will first ask you to accept theselected site configuration file (.SDF) and to send the node settings to the node.In case radio link equipment is installed, you can monitor the radio hops in theCheck and Fine-tune Hops page. The Commissioning Wizard willautomatically draw a commissioning report which is displayed on the last page ofthe wizard sequence.In case you will later install new radios, you can commission the equipment bylaunching the Radio Wizard from the FXC RRI menu. The procedure is exactlythe same as described in the previous section.FC RRI is not compatible with Nokia MetroHub.2.4 Configuring identifications and settingsThis section describes how to view or change outdoor unit related identificationsor settings with Nokia BTS Manager or Nokia MetroHub Manager. When you areusing Nokia BTS Manager, all Nokia MetroHopper related identifications andsettings are accessed through the Transmission menu. In case you are usingNokia MetroHub Manager, these are found under the FXC RRI menu.For simplicity, both the Transmission menu of Nokia BTS Manager and the FXCRRI menu of Nokia MetroHub Manager are henceforth referred to asTransmission / FXC RRI. |
Related manuals for Nokia MetroHopper
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine