[ 96 ]RECALL TOUCH TONE STRING FROM THE PHONE BOOK1 During a call to the automated service, press Options, scroll to Touchtones and press Select.2 Press Search, scroll to the touch tone string entry in your phone book,then press OK.3 Press Tones to send the touch tones.Store touch tone string with phone numberYou can store touch tone strings (for example: voice mailbox number andPIN code) as a part of a phone book entry. Once the string is stored, it issent automatically (instead of entering the touch tones from the keypad).1 Enter the phone number of the automated service.2 Use the */+ key to enter a w (Press */+ four times) or p (Press #/+three times) after the number.• w (wait) - The phone waits for you to press Send. When you pressSend, the phone sends the touch tone string you have saved.• p (pause) - The phone pauses for 2.5 seconds, then automaticallysends the touch tone string you have saved.3 Enter the touch tone string after the w or p characters as required bythe service.Example: 214-555-1234w1234#p5678#4 Save this phone book entry as you normally would.Once the touch tone string is stored with the phone number, you can nowcall the number and have the touch tone strings sent automatically.• LINK PHONE BOOK ENTRIESThis feature allows you to store a phone number in one phone booklocation and link it to another phone book entry.For example, linking the phone number of an automated service (example:automated banking service) with a touch tone string entry in your phonebook (example: account and PIN numbers) automatically recalls andsends the touch tone string when you call the service.
