Camera22• To send the image using multimedia, e-mail, Bluetoothconnectivity, or infrared, or upload it to a compatibleonline album, press the call key, or select Send. Formore information, see ‘Messaging’, p. 58, ‘Bluetoothconnectivity’, p. 93, and ‘Share online’, p. 36. Thisoption is not available during an active call. You canalso send the image to a call recipient during an activecall. Select Send to caller (only available during anactive call).• To tag images to the Print Basket for later printing,select Add to Print Basket.• To print the picture, select Print. See ‘Image print’,p. 34.• To capture a new image, select New image.To rename the image, select Options > Rename image.To use the picture as wallpaper in the active standby,select Options > Set as wallpaper.Still image camera settingsThere are two kinds of settings for the still image camera:Image setup and main settings. To adjust Image setup,see ‘Setup settings—Adjust color and lighting’, p. 23. Thesetup settings return to the default settings after youclose the camera, but the main settings remain the sameuntil you change them again. To change the main settings,select Options > Settings and from the following:Image quality—Print 3M - Large-Large (2048x1536resolution), Print 2M - Medium (1600x1200 resolution),Print/e-mail 0.8M - Small (1024x768 resolution), orMultimedia message 0.3M (640x480 resolution). Thebetter the image quality, the more memory the imageconsumes. If you want to print the image, select Print 3M- Large, Print 2M - Medium, or Print/e-mail 0.8M -Small. If you want to send it through e-mail, select Print/e-mail 0.8M - Small. To send the image through MMS,select Multimedia message 0.3M.These resolutions are only available in the main camera.Add to album—Select whether you want to save the imageto a certain album in the gallery. If you select Yes, a list ofavailable albums opens.Show captured image—Select On if you want to see thecaptured image after it is taken, or Off if you want tocontinue taking pictures immediately.Default image name—Define the default name for thecaptured images.Extended digital zoom (main camera only)—Select On toallow the zoom increments to be smooth and continuousbetween digital and extended digital zoom. If you want tolimit the zoom to where the selected image quality ismaintained, select Off.Capture tone—Select the tone you want to hear when youtake a picture.