Media applications53The FM radio depends on an antenna other than thewireless device antenna. A compatible headset orenhancement needs to be attached to the device for theFM radio to function properly.Press , and select Applications > Radio. To start astation search, select or . To change thefrequency manually, select Options > Manual tuning.If you have previously saved radio stations, select orto go to the next or previous saved station, or pressthe corresponding number key to select the memorylocation of a station.To adjust the volume, press the volume keys. To listen tothe radio using the loudspeaker, select Options > Activateloudspeaker.Warning: Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing. Do not hold the device near your ear when theloudspeaker is in use, because the volume may beextremely loud.To view available stations based on location, selectOptions > Station directory (network service).To save the current tuned station to your station list, selectOptions > Save station. To open the list of your savedstations, select Options > Stations.To return to the standby mode and leave the FM radioplaying in the background, select Options > Play inbackground.View visual contentTo check availability and costs, and to subscribe to theservice, contact your service provider.To view available visual content for a tuned station, selector Options > Start visual service. If the visualservice ID has not been saved for the station, enter it, orselect Retrieve to search for it in the station directory(network service).When the connection to the visual service is established,the display shows the current visual content.To adjust display settings for the visual content view,select Options > Display settings.Saved stationsYou can save up to 20 radio stations in the radio. To openyour station list, select Options > Stations.To listen to a saved station, select Options > Station >Listen. To view available visual content for a station withVisual Radio service, select Options > Station > Startvisual service.