ToolsCell info display—Select On to set the device to indicatewhen it is used in a cellular network based on microcellularnetwork (MCN) technology and to activate cell inforeception.EnhancementIn the standby mode, indicates a compatible headsetis connected, and that the headset is unavailable, or aBluetooth connection connectivity to a headset is lost.indicates a compatible loopset is connected and thata Text phone is connected.Select Headset, Loopset, Text phone, Bluetoothhandsfree, or Music stand and from the following:Default profile—Set the profile that you want activatedeach time you connect a certain compatible enhancementIf you are using a Text phone, you must activate it on yourdevice. Press , and select Tools > Settings >Enhancement > Text phone > Use text phone > Yes.Voice commandsYou can use voice commands to control your device.For more information about the enhanced voicecommands supported by your device, see “Voice dialing”,p. 57.To activate enhanced voice commands for startingapplications and profiles, you must open the Voice cm.application and its Profiles folder. Press , and selectTools > Voice cm. > Profiles; the device creates voicetags for the applications and profiles. To use enhancedvoice commands, press and hold in the standby mode,9253189_N80_en_apac.book Page 107 Tuesday, September 25, 2007 10:09 AM
