Camera• To send an image to the other party during an activecall, select Options > Send to caller.• To edit the picture, select Options > Edit. See “Editimages”, p. 18.• To print the picture, select Options > Print. See “Imageprint”, p. 33.Take pictures in a sequenceAdvanced sequence is available only in the main camera.To set the camera to take several pictures in a sequence,select Options > Advanced sequence, and set theshooting frequency. The number of pictures is restricted bythe available memory.To take the pictures, press the capture key.After you take the pictures, they are shown in a grid on thedisplay. To view a picture, press to open it.select Options > Self timer > 2 seconds, 10 seconds,or 20 seconds. To activate the self-timer, select Activate.The self-timer indicator ( ) blinks and the device beepswhen the timer is running. The camera takes the pictureafter the selected delay elapses.You can also use the self-timer in the sequence mode.Tip! Select Options > Self timer > 2 seconds tokeep your hand steady when taking a picture.The flashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do not use theflash on people or animals at close range. Do not cover theflash while taking a picture.The camera has an LED flash for low light conditions.9253189_N80_en_apac.book Page 15 Tuesday, September 25, 2007 10:09 AM
