Nokia N81 User Manual

Also see for N81: User guide Specification sheet User guide User guide User guide

Contents

Nokia N81 User Manual Manual pdf 58 page image

Copyright © 2007 Nokia. All rights reserved.Camera57to activate the sequence mode (images only). See ’Takepictures in a sequence’, p. 59.to select a color effectto show or hide the viewfinder grid (images only)to adjust white balanceto adjust the exposure compensation (images only)to adjust light sensitivity (images only)to switch between the video and image modesThe icons change to reflect the current status of thesetting.The available options vary depending on the capture modeand view you are in.See also active toolbar options in ’After taking a picture’,p. 57, ’After recording a video’, p. 62, and ’Active toolbar’,p. 47 in Gallery.After taking a pictureAfter you take the picture, select the following from theactive toolbar (available only if Show captured image isset to On in still image camera settings):• If you do not want to keep the image, select Delete.• To send the image, press the call key, or select Send. Formore information, see ’Messaging’, p. 36, ’Bluetoothconnectivity’, p. 70, and ’Share online’, p. 52. Thisoption is not available during an active call. You canalso send the image to a call recipient during an activecall. Select Send to caller (only available during anactive call).• To tag images to the Print Basket for later printing,select Add to Print Basket.• To send the picture to a compatible online album,select Post to (available only if you have set up anaccount for a compatible online album. See ’Shareonline’, p. 52).To use the picture as wallpaper in the active standby, selectOptions > Set as wallpaper.To set the image as a call image for a contact, selectOptions > Set as contact call img..Still image camera settingsThere are two kinds of settings for the still image camera:active toolbar settings and main settings. To use activetoolbar settings, see ’Adjust color and lighting’, p. 58. Theactive toolbar settings return to the default settings afteryou close the camera, but the main settings remain thesame until you change them again.To change the main settings, select Options > Settingsand from the following: