Copyright © 2007 Nokia. All rights reserved.Personalize your device95If you want the caller’s name to be spoken when yourdevice rings, select Options > Personalise, and set Saycaller's name to On. The caller’s name must be saved inContacts.To create a new profile, select Options > Create new.Offline profileThe Offline profile lets you use the device withoutconnecting to the wireless network. When you activate theOffline profile, the connection to the wireless network isturned off, as indicated by in the signal strengthindicator area. All wireless RF signals to and from thedevice are prevented. If you try to send messages, they areplaced in the outbox to be sent later.When the Offline profile is active, you can use your devicewithout a (U)SIM card.Important: In the offline profile you cannot make orreceive any calls, or use other features that requirecellular network coverage. Calls may still be possible tothe official emergency number programmed into yourdevice. To make calls, you must first activate the phonefunction by changing profiles. If the device has beenlocked, enter the lock code.When you have activated the Offline profile, you can stilluse the wireless LAN, for example, to read your e-mail orbrowse on the internet. Remember to comply with anyapplicable safety requirements when establishing andusing a wireless LAN connection. See ’Wireless LAN’, p.76. You can also use Bluetooth connectivity while in theOffline profile. See ’Bluetooth connectivity’, p. 70.To leave the Offline profile, press the power key, and selectanother profile. The device re-enables wirelesstransmissions (providing there is sufficient signalstrength).3-D tonesPress , and select Tools > Utilities > 3-D tones. With3-D tones you can enable three-dimensional soundeffects for ringing tones. Not all ringing tones support 3-Deffects.To enable the 3-D effects, select 3-D ringing toneeffects > On.To change the 3–D effect that is applied to the ringingtone, select Sound trajectory and the desired effect. Tomodify the effect, select from the following settings: