Nokia N90 User Manual

Also see for N90: Service manual Additional applications User guide User guide Manual

Contents

Camera and Gallery43 Copyright © 2005 Nokia. All rights reserved.automatically in the Images & video folder of Gallery. See‘Gallery’, p. 55.Tip! You can also take pictures conveniently in theCamera mode. See ‘Take pictures in the Camera mode’,p. 47.Imaging mode camera indicators show the following:• The phone memory ( ) and memory card ( )indicators (1) show where images are saved.• The images indicator (2) estimates how many images,depending on the selected image quality, can fit in theremaining memory of your device or the memory card.• The scene indicator (3) shows the active scene. See‘Scenes’,p. 45.• The flash indicator(4) shows if the flashis set to Automatic( ), Red eye redu.( ), Forced ( ),or Off ( ).• The green focusindicator (5) isdisplayed when thefocus point is lockedby the viewfinder (not visible in sequence mode).• The self-timer indicator (6) shows that theself-timer is activated. See ‘You in the picture—self-timer’, p. 44.• The sequence mode indicator (7) shows that thesequence mode is active. See ‘Take pictures in asequence’, p. 44.• The resolution indicator (8) shows the selected imagequality. See ‘Adjust still image camera settings’, p. 46Shortcuts are as follows:• Press the joystick up and down to zoom in and zoomout. The zoom indicator, which appears on the sidepane, shows the zoom level.• Press the joystick to enter the Image setup settings.See ‘Setup settings—Adjust colour and lighting’, p. 45.• Press the joystick left or right to change the flash mode.Saving the captured image may take longer if you changethe zoom, lighting, or colour settings.When taking a picture, note the following:• It is recommended to use both hands to keep thecamera still.• To take images or record video in differentenvironments, use the proper scene for eachenvironment. See ‘Scenes’, p. 45.• To make lighting and colour adjustments before takinga picture, press the joystick, or select Options > Imagesetup > Scene, Flash, White balance, Exposure value,or Colour tone. See ‘Setup settings—Adjust colour andlighting’, p. 45.