Nokia N90 User Manual

Also see for N90: Service manual User guide Additional applications User guide Manual

Contents

Nokia N90 User Manual Manual pdf 95 page image

Connectivity95Copyright © 2005 Nokia. All rights reserved.To interrupt the search, press Stop. The device listfreezes.3 Select the device with which you want to connect.4 If the other device requires pairing before data can betransmitted, a tone sounds, and you are asked to entera passcode. See ‘Pair devices’, p. 95.5 When the connection has been established, Sendingdata is shown.The Sent folder in Messaging does not store messages sentusing a Bluetooth connection.Tip! When searching for devices, some devices mayshow only the unique addresses (device addresses). Tofind the unique address of your phone, enter the code*#2820# in the standby mode.Pair devicesGlossary: Pairing means authentication. The users of thetwo devices with Bluetooth technology should agree ona common passcode, and use the same passcode forboth devices in order to pair them. Devices that do nothave a user interface have a factory-set passcode.In the Bluetooth main view, press to open the paireddevices view ( ).Before pairing, create your own passcode (1—16 digits),and agree with the owner of the other device to use thesame code. The passcode is used only once.To pair with a device, select Options > New paired device.The phone starts a device search. Select the device. Enterthe passcode. The same passcode must be entered on theother device as well. After pairing, the device is saved tothe paired devices view.Paired devices are indicated by in the device search.Tip! To define a short name (nickname or alias) for apaired device, scroll to the device, and select Options >Assign short name in the paired devices view. Thisname helps you to recognise a certain device duringdevice search or when a device requests a connection.To set a device to be authorised or unauthorised, scroll toa device, and select from the following options:Set as authorised—Connections between your device andthis device can be made without your knowledge. Noseparate acceptance or authorisation is needed. Use thisstatus for your own devices, such as your compatibleheadset or PC, or devices that belong to someone youtrust. indicates authorised devices in the paireddevices view.Set as unauthorised—Connection requests from thisdevice must be accepted separately every time.To cancel a pairing, scroll to the device, and selectOptions > Delete. If you want to cancel all pairings, selectOptions > Delete all.