Write text53close the predictive list firstly and then continue toinput the Pinyin for next Chinese character.Pinyin input example: To input 拼音1 Enter into the text editing window for writing shortmessage or any other possible position for inputtingChinese character, and switch to Pinyin input mode.2 Input the Pinyin letter pin for 拼: press , ,in sequence, and finally input once forthe 1st tone.3 Press the right scroll key to highlight pin - and thenpress to activate the candidate list.4 The character 拼 will be shown in the candidate list, ifthis character locates in the first highlighted positionof the candidate list, you could directly press toinput it, otherwise, you should firstly press the rightscroll key to highlight this character and then pressto input it.5 After you input the character 拼 , the predicative listwill be shown, and the character 音 is shown in thepredictive list. You could use the same methoddescribed in item 4 to input this character.Stroke input methodThe strokes are classified according to the followingtable.
