Camera Tip! Select Options > Self timer > 2 seconds tokeep your hand steady when taking a picture.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do not use theflash on people or animals at close range. Do not coverthe flash while taking a picture.The camera has an LED flash for low light conditions.The following flash modes are available: Automatic ( ),On ( ), and Off ( ).To switch between the flash modes, press the flash key.Setup settings — Adjust color andlightingTo enable the camera to reproduce colors and lightingWhite balance — Select the current lighting conditionfrom the list. This allows the camera to reproduce colorsmore accurately.Exposure value (images only) — Adjust the exposure timeof the camera.Colour tone — Select a color effect from the list.The screen display changes to match any settings youmake, so that you see how the change affects the picturesor videos.The available settings vary depending on the selectedcamera.The setup settings are camera specific; if you change thesettings in the secondary camera, the settings in the maincamera do not change. The setup settings do, however,transfer between the image and video modes.Shooting modes9247229_N93-1_en_Apac.book Page 26 Thursday, May 18, 2006 3:43 PM
