Make calls Answer or reject a callTo answer the call in the Fold open mode, press . IfAnykey answer is set to On, to answer a call in the Foldclosed mode, open the fold, and the call startsautomatically. Otherwise, open the fold, and press .To mute the ringing tone when a call comes in, selectSilence.Tip! If a compatible headset is connected to thedevice, to answer and end a call, press the headsetkey.If you do not want to answer a call, in the Fold open mode,press to reject it. The caller hears a line busy tone. Ifyou have activated the Call divert > If busy function todivert calls, rejecting an incoming call also diverts the call.See "Call divert", on page 105.When you reject an incoming call in the Fold open mode,you can also send a text message to the caller informingAnswer or reject a video callWhen a video call arrives, is displayed.Tip! You can assign a ringing tone for video calls.Press and select Tools > Profiles, a profile, andOptions > Personalise > Video call tone.In the Fold open mode, press to answer the video call.To start sending video, activate the View mode, and a livevideo image, recorded video clip, or the image beingcaptured by the camera in your device is shown to thecaller. If you want to send a live video image, turn thecamera unit to the direction from which you want to sendthe video image. If you do not activate the View mode,video sending is not possible, but you can still hear theother person. A grey screen is shown in place of the video.To replace the grey screen with a still image, see "Callsettings", Image in video call, on page 98.Note: Even if you have denied video sending during9247229_N93-1_en_Apac.book Page 58 Thursday, May 18, 2006 3:43 PM