Camera52seconds, or 20 seconds. To activate the self-timer, selectActivate. The self-timer indicator ( ) blinks and thedevice beeps when the timer is running. The camera takesthe picture after the selected delay elapses.To switch off Self timer, in the active toolbar, select Selftimer > Off.Tip! In the active toolbar, select Self timer > 2seconds to keep your hand steady when taking apicture.Record videos1 To activate the main camera, open the lens cover. Ifthe camera is in the Image mode, select Video modefrom the active toolbar.2 Press the capture key to start recording. In the portraitmode, use the scroll key for recording. The red recordicon is shown and a tone sounds, indicating thatrecording has started.3 Select Stop to stop recording. The video clip isautomatically saved to the Images & video folder ofGallery. See ‘Gallery’, p. 55. The maximum length ofthe video is 60 minutes (if enough memory available).To pause recording at any time, press Pause. The pauseicon ( ) blinks on the display. Video recordingautomatically stops if recording is set to pause and thereare no keypresses within a minute. Press Continue toresume recording.To zoom in or out of the subject, press the zoom key on theside of the device.To make lighting and color adjustments before recording avideo, use the scroll key to scroll through the activetoolbar. See ‘Setup settings—adjust color and lighting’,p. 50 and ‘Scenes’, p. 50.To free memory before recording a video, select Options >Go to free memory (only available if you have backed upimages or video clips). See ‘Free memory’, p. 58.To activate the front camera, select Options > Usesecondary camera.Video capture indicatorsThe video viewfinder displays the following:1 The current capture mode indicator.2 The audio mute on indicator.3 The active toolbar, which you can scroll through beforerecording to select different items and settings (thetoolbar is not displayed during recording). See ‘Activetoolbar’, p. 47.4 The total available video recording time. When you arerecording, the current video length indicator alsoshows the elapsed time and time remaining.