GalleryTo connect a compatible PC to the home network, onthe PC, you must install the related software from theCD-ROM or DVD-ROM supplied with your device.Configure settingsTo configure the home network application, select Tools >Connectivity > Home netw. > Settings and from thefollowing:Home access point — Select Always ask if you want thedevice to ask for the home access point every time youconnect to the home network, Create new to define a newaccess point that is used automatically when you useHome netw. or None. If your home network does not havewireless LAN security settings enabled, you get a securitywarning. You can continue, and switch the wireless LANsecurity on later; or cancel defining the access point, andfirst switch on the wireless LAN security. See Wireless LANin "Access points", on page 117.Device name — Enter a name for your device that is shownContent sharing on, the other UPnP compatible devices inthe home network can view and copy your files you haveselected for sharing in the Images & video folder.Images & video — Select media files for sharing with otherdevices, or view the sharing status of Images & video. Toupdate the content of the folder, select Options > Refreshcontent.View and share media filesIf Content sharing is on in your device, the other UPnPcompatible devices in the home network can view andcopy the media files you have selected to share in Sharecontent. If you do not want the other devices to accessyour files, set Content sharing off. Even if Contentsharing is off in your device, you can still view and copythe media files stored in another home network device if itis allowed by the other device.9206321_N95-1_en_Apac.book Page 59 Friday, October 19, 2007 11:52 AM
