the settings over the air or give you a list of theneeded parameters.To add a SIP address to a contact card, do thefollowing:1. Press , and select Contacts.2. Open the contact card (or start a new card forthat person).3. Select Options > Add detail or Share view.4. Enter the SIP address in the formatusername@domainname (you can use an IPaddress instead of a domain name).If you do not know the SIP address for thecontact, you can use the phone number of therecipient, including the country code, to sharevideo (if supported by the network serviceprovider).UMTS connection settingsTo set up your UMTS connection, do the following:● Contact your service provider to establish anagreement for you to use the UMTS network.● Ensure that your device UMTS access pointconnection settings are configured properly.Share live video or video clips1. When a voice call is active, select Options >Share video > Live video.To share a video clip, select Options > Sharevideo > Recorded clip. A list of video clipssaved on the device memory or mass memoryopens. Select a clip you want to share. Topreview the clip, select Options > Play.2. If you share live video, your device sends theinvitation to the SIP address you have added tothe contact card of the recipient.If you share a video clip, select Options >Invite. You may need to convert the video clipinto a suitable format to be able to share it. Clipmust be converted for sharing. Continue?appears. Select OK.If the contact information of the recipient issaved in Contacts, and the contact has several SIPaddresses or phone numbers including thecountry code, select the desired address ornumber. If the SIP address or phone number ofthe recipient is not available, enter the SIPaddress or the phone number of the recipientincluding the country code, and select OK tosend the invitation.3. Sharing begins automatically when the recipientaccepts the invitation.4. To pause the sharing session, select Pause. Toresume sharing, select Continue. To fastforward or rewind the video clip, scroll up ordown. To play the clip again, press the end key. 127 Make calls