● Anykey answer — Select On, and you cananswer an incoming call by briefly pressing anykeypad key, except the left and right selectionkeys, the power key, and the end key.● Line in use — This setting (network service) isshown only if the SIM card supports twosubscriber numbers, that is, two phone lines.Select which phone line you want to use formaking calls and sending text messages. Calls onboth lines can be answered irrespective of theselected line. If you select Line 2 and have notsubscribed to this network service, you are notable to make calls. When line 2 is selected, isshown in the standby mode.Tip: To switch between the phone lines,press and hold # in the standby mode.● Line change — To prevent line selection(network service), select Disable if supported byyour SIM card. To change this setting, you needthe PIN2 code.Call divertPress , and select Tools > Settings > Phone >Call divert.Call divert allows you to divert your incoming callsto your voice mailbox or another phone number. Fordetails, contact your service provider.Select which calls you want to divert and the desireddiverting option. Set the option on (Activate) or off(Cancel), or check whether the option is activated(Check status).Several diverting options can be active at the sametime. When all calls are diverted, is shown inthe standby mode.Call barring and call diverting cannot be active atthe same time.Call barringPress , and select Tools > Settings > Phone >Call barring.Call barring (network service) allows you to restrictthe calls that you make or receive with the device.To change the settings, you need the barringpassword from your service provider.Call barring and call diverting cannot be active atthe same time.When calls are barred, calls may be possible tocertain official emergency numbers.Voice call barringSelect the desired barring option, and set it on(Activate) or off (Cancel), or check whether theoption is active (Check status). Call barring affectsall calls, including data calls.154 Settings
