Make callsVoice calls1. In the standby mode, enter the phone number,including the area code. To remove a number,press C.For international calls, press * twice for the +character (replaces the international accesscode), and enter the country code, area code(omit the leading zero if necessary), and phonenumber.2. Press the call key to call the number.3. Press the end key to end the call (or to cancel thecall attempt).Pressing the end key always ends a call, even ifanother application is active.To make a call from Contacts, press , and selectContacts. Scroll to the desired name, or enter thefirst letters of the name to the search field. Matchingcontacts are listed. To call, press the call key. If youhave saved several numbers for a contact, select thedesired number from the list.Options during a callTo adjust the volume during a call, use the volumekey on the side of your device. You can also use thescroll key. If you have set the volume to Mute, selectUnmute first.To send an image or a video clip in a multimediamessage to the other participant of the call, selectOptions > Send MMS (in UMTS networks only). Youcan edit the message and change the recipientbefore sending. Press the call key to send the file toa compatible device (network service).To put an active voice call on hold while answeringanother incoming call, select Options > Hold. Toswitch between the active and the held call, selectOptions > Swap.To send DTMF tone strings (for example, apassword), select Options > Send touch tones.Enter the DTMF string or search for it in Contacts. Toenter a wait character (w) or a pause character (p),press * repeatedly. To send the tone, select OK. Youcan add DTMF tones to the phone number or DTMFfields in a contact card.114 Make calls
