You may receive access point settings in a messagefrom a service provider. Some or all access points maybe preset for your device by your service provider, andyou may not be able to change, create, edit, or removethem.When you open one of the access point groups ( ,, , ), you can see the access point types:indicates a protected access pointindicates a packet data access pointindicates a wireless LAN (WLAN) access pointTip: You can create internet access points in aWLAN with the WLAN wizard.To create a new access point, select Access point.The device asks to check for available connections.After the search, connections that are already availableare shown and can be shared by a new access point. Ifyou skip this step, you are asked to select a connectionmethod and to define the settings needed.To edit the settings of an access point, open one of theaccess point groups, and select an access point. Followthe instructions from your service provider.● Connection name — Enter a name for theconnection.● Data bearer — Select the data connection type.Depending on the data connection you select, onlycertain setting fields are available. Fill in all fieldsmarked with Must be defined or with a red *. Otherfields can be left empty, unless your service providerhas instructed otherwise.To use a data connection, your service provider mustsupport this feature, and if necessary, activate it foryour SIM card.Create access point groupsSelect Menu > Settings and Connectivity >Destinations.Some applications allow you to use access point groupsfor network connections.To avoid selecting a single access point every time thedevice makes a network connection, you can create agroup that contains various access points to connect tothat network and define the order in which the accesspoints are used.For example, you can add wireless LAN (WLAN) andpacket data access points to an internet access pointgroup, and use the group for browsing the web. If yougive WLAN the highest priority, the device connects tothe internet through WLAN, if available, and through apacket data connection if not.To create a new access point group, select Options >Manage > New destination.To add access points to an access point group, selectthe group and Options > New access point. To copyan existing access point from another group, select the 73 Connectivity
