To put the call on hold or unhold it, select or .To activate the loudspeaker, select . If you have attacheda compatible headset with Bluetooth connectivity, to routethe sound to the headset, select Options > Activate BThandsfree.To switch back to the handset, select .To end the call, select .To switch between the active and held calls, select .Tip: When you have only one active voice call, to put the callon hold, press the call key. To unhold the call, press the callkey again.1 To send DTMF tone strings (for example, a password),select Options > Send DTMF.2 Enter the DTMF string, or search for it in the contacts list.3 To enter a wait character (w) or a pause character (p),press * repeatedly.4 To send the tone, select OK. You can add DTMF tones tothe phone number or DTMF field in contact details.To end an active call and replace it by answering the waitingcall, select Options > Replace.To end all your calls, select Options > End all calls.Many of the options that you can use during a voice call arenetwork services.Voice and video mailboxesTo call your voice or video mailbox (network services, videomailbox available only in UMTS networks), in the homescreen, select to open the dialler, tap and hold 1, andselect Voice mailbox or Video mailbox.1 To change the phone number of your voice or videomailbox, select Menu > Settings and Calling > Callmailbox, a mailbox, and Options > Change number.2 Enter the number (obtained from your network serviceprovider), and select OK.Answer or reject a callTo answer a call, press the call key.To answer the call when the touch screen is locked, swipeSwipe to answer from left to right.To unlock the touch screen without answering a call, swipeSwipe to unlock from right to left, and then answer or rejectthe call, or send a reject call text message. The ringing toneis muted automatically.If you do not want to answer a call, to reject the call, pressthe end key. If the call divert feature (network service) isactivated, rejecting an incoming call also diverts the call.Make calls 35