2. Insert a compatiblememory card in theslot. Ensure that thecontact area on thecard is facing downand towards the slot.3. Push the card in. Youcan hear a click when thecard locks into place.4. Replace the back cover.Keep the device facingdown when replacing thecover. Ensure that thecover is properly closed.Remove the memory cardImportant: Do not remove the memory cardduring an operation when the card is beingaccessed. Doing so may damage the memory cardand the device, and corrupt data stored on the card.1. Before you remove the card, press the powerkey, and select Remove memory card. Allapplications are closed.2. When Removing memory card will close allopen applications. Remove anyway? isdisplayed, select Yes.3. When Remove memory card and press 'OK' isdisplayed, remove the back cover of the device.4. Press the memory card to release it from the slot.5. Pull out the memory card. If the device isswitched on, select OK.6. Replace the back cover. Ensure that the cover isproperly closed.Antenna locationsYour device may have internal and externalantennas. Avoid touching the antenna areaunnecessarily while the antenna is transmitting orreceiving. Contact with antennas affects thecommunication quality and may cause a higherpower level during operation and may reduce thebattery life.18 Get startedCyanCyan MagentaMagenta YellowYellow BlackBlack