Nokia N97 miniRM-553 / RM-555Service Manual Level 1&221 Confidential Copyright © 2009 NOKIA All rights reserved Version 1.0 ISSUE 112. TOUCH PANEL RECALIBRATIONAfter replacing the RM-555/RM-553 A-Cover, the touch panel settings in the phone must berecalibrated to match with the new touch panelTo perform this procedure, you will require the following equipment: PC with Phoenix Service Software USB Cable CA-101 FLS-5 Dongle SS-93 Tool (or a stylus).12.1 Recalibration setup1. Power on the phone, and boot to the home screen. (USIM is not required)2. Connect the phone to the PC via USB cable CA-101.3. On the phone, select “PC Suite Mode”.4. Ensure the PC has FLS-5 dongle connected.5. Start Phoenix Service SW.6. Select USB connection.7. Scan Product (Phoenix > File > Scan Product)8. Put the phone into Local Mode