101. Open the memory card slot door.2. Place the memory card in the slotwith the gold-colored area facingdown. Push the card gently to lockit into place.3. Close the slot door.Remove a memory cardImportant: Do not remove the memory card in the middle of an operation when thecard is being accessed. Removing the card in the middle of an operation maydamage the memory card as well as the device, and data stored on the card maybe corrupted.1. In the standby mode, briefly press the power key.2. Scroll to Remove memory card, and select OK > Yes.3. Open the memory card slot door.4. Push the card gently to release it.5. Pull the card out, and select OK.6. Close the slot door.■ Charge the batteryYour battery has been precharged but the charging levels may vary.1. Connect the charger to the wall outlet.2. Connect the charger to the device. Youcan use your device while it is charging.3. When the battery is fully charged,disconnect the charger from thedevice, then from the wall outlet.If the battery is completely discharged,it may take a few minutes before thecharging indicator appears on thedisplay or before any calls can be made.The charging time depends on the chargerand the battery used.
