37CompassYour device has a magnetic compass.The compass should always be properly calibrated. Electromagnetic fields, largemetal objects, other external circumstances, and opening or closing the slide mayreduce the accuracy of the compass. Never rely solely on the device compass.To enable the compass and try to find yourcurrent position, press the Navigator key. If thecircle around the compass is red, the compassis not calibrated. To calibrate the compass,rotate the device around all axes with yourwrist in a continuous movement until the circleis green. When you rotate the device, makesure that the device display momentarily facestoward the ground.If the circle is yellow, the calibration accuracy is low, and you should continue rotating thedevice. When the compass is enabled and the circle around the compass is green, the mapview turns automatically according to which direction the top of the device is pointing.To enable or disable the compass, select Options > Tools > Turn compass on or Turn compassoff. When the compass is not in use, the circle around the compass is white and the mapview does not turn automatically.Find locationsTo find a location in the city or area displayed on the map, enter the full or partial address ofthe location in the search field, and select Search. To find a location in another city, enterthe city and the full or partial address, and select Search. If possible, write the name of cityin the local language or English. If you are unsure of the address, enter the only first threecharacters of the address. To find a city in a different country, enter the full name of thecountry in English or the three-letter ISO country code and the city. For example, to findLondon using the country code, enter GBR London, and select Search.To find a specific address, select Options > Search > Addresses. Country/Region * and City orZIP code are mandatory.To browse through or search for places and attractions in your area, select Options > Search >Places and a category. For example, to find a hotel, select Options > Search > Places >Accommodation. To find a hotel by its name, enter the name, and select Search, or to browsethe hotels, select a category or Search all.To find an address saved in Contacts, select Options > Search > Addresses > Options >Select from Contacts.
