1. Insert the SIM and memorycard1.With the phone facing down, put your fingernail inthe small recess located on the bottom edge.2.Bend the cover open and remove it.3.Slide the nano-SIM card into the SIM slot with themetal contact area down until it locks into place. Ifyou have a dual-SIM phone, insert the second SIMinto the SIM2 slot until it locks into place.4.If you have a microSD memory card, slide the cardinto the memory card slot.5.Press the top edge of the back cover against thetop edge of your phone, and then snap the coverinto place, locking all the hooks around the edges ofthe cover.Warning! Do not open the battery cover, it mayharm your device.Use only original nano-SIM cards. Use of incompati-ble SIM cards may damage the card or the device,and may corrupt data stored on the card.2. Charge the battery and switchthe phone onPlug a compatible charger into a wall outlet, andconnect the cable to your phone. Your phone sup-ports the USB micro-B cable. You can also chargeyour phone from a computer with a USB cable, butit may take a longer time.If the battery is completely discharged, it may takeseveral minutes before the charging indicator is dis-played.To switch your phone on, press and hold the powerkey until the phone vibrates. The phone guides youthrough the setup.3. Learn more about your newNokia phoneFor a printable user guide, online user guide, andtroubleshooting help, go to www.nokia.com/phones.Get StartedNokia XTA-1029/ TA-1007 EN 1.0PartnumberXMain cameraMicrophoneLoudspeakerCharger connectorAudio connectorMicrophoneFront cameraEarpiecePower/Lock keyVolume keysProximity sensorENUS_Dynamo_QSG_0_6_DRAFT.fm Page 1 Thursday, July 20, 2017 3:10 PM