Select from the following:WLAN network name — Select Enter manually or Search for networks.If you select an existing network, the Wi-Fi network mode and Wi-Fi securitymode are determined by the settings of its access point device.Network status — Define whether the network name is displayed.WLAN network mode — Select Ad-hoc to create an ad hoc network and toallow devices to send and receive data directly; a WLAN access point deviceis not needed. In an ad hoc network, all devices must use the same WLANnetwork name.WLAN security mode — Select the encryption used: WEP, 802.1x, orWPA/WPA2 (802.1x and WPA/WPA2 are not available for ad hoc networks). If youselect Open network, no encryption is used. The WEP, 802.1x, and WPAfunctions can be used only if the network supports them.Homepage — Enter the web address of the starting page.Use access point — Set the device to create a connection using this accesspoint automatically or after confirmation.The available options may vary.Security settings for WEPDefine the WEP security settings if you have selected the wired equivalentprivacy (WEP) as the WLAN security mode.1 Select Menu > Settings and Connectivity > Destinations.2 Select the access point group that has the desired WLAN access point,and select the access point.You can also define WEP settings when creating a new WLAN access point.3 Select WLAN security mode > WEP.4 Select WLAN security settings, and define the following:Connectivity 153© 2010 Nokia. All rights reserved.
