Use access point — Set the device to create a connection using this access pointautomatically or after confirmation.The available options may vary.Security settings for WEPDefine the WEP security settings if you have selected the wired equivalent privacy(WEP) as the WLAN security mode.1 Select Menu > Settings and Connectivity > Destinations.2 Select the access point group that has the desired WLAN access point, and selectthe access point.You can also define WEP settings when creating a new WLAN access point.3 Select WLAN security mode > WEP.4 Select WLAN security settings, and define the following:WEP key in use — Select the wired equivalent privacy (WEP) key number. Youcan create up to four WEP keys. The same settings must be entered on the WLANaccess point device.Authentication type — Select Open or Shared for the authentication typebetween your device and the WLAN access point device.WEP key settings — Enter WEP encryption (length of the key), WEP keyformat (ASCII or Hexadecimal), and WEP key (the WEP key data in the selectedformat).Security settings for 802.1x and WPA/WPA2Define the 802.1x or WPA/WPA2 security settings if you have selected either as theWLAN security mode.1 Select Menu > Settings and Connectivity > Destinations.Connectivity 137© 2009 Nokia. All rights reserved. 137
