and from the device are prevented. If you try to send messages, they are placed in theOutbox folder to be sent later.When the Offline profile is active, you can use your device without a SIM card.If the SIM card is not properly in place, the device starts in the Offline profile.Important: In the offline profile you cannot make or receive any calls, or useother features that require cellular network coverage. Calls may still be possible to theofficial emergency number programmed into your device. To make calls, you must firstactivate the phone function by changing profiles. If the device has been locked, enterthe lock code.When you have activated the offline profile, you can still use the wireless LAN, forexample, to read your e-mail or browse on the internet. Remember to comply with anyapplicable safety requirements when establishing and using a wireless LAN connection.You can also use Bluetooth connectivity while in the offline profile.To switch to another profile, press the power key briefly, and select another profile. Thedevice re-enables wireless transmissions (providing there is sufficient signal strength).Sensor settings and display rotationWhen you activate the sensors in your device, you can control certain functions byturning the device.Select Menu > Settings and Phone > Sensor settings.Select from the following:● Sensors — Activate the sensors.● Turning control — Select Silencing calls and Snoozing alarms to mute calls andsnooze alarms by turning your device so that the display faces down. SelectAuto-rotate display to rotate the display content automatically when you turn the deviceon its left side or back to a vertical position. Some applications and features may notsupport rotating the display content.HeadsetYou can connect a compatible headset or compatible headphones to your device. Youmay need to select the cable mode.Some headsets come in two parts, a remote control unit and headphones. A remotecontrol unit has a microphone and keys to answer or end a phone call, adjust the volume,and play music or video files. To use the headphones with a remote control unit, connectthe unit to the Nokia AV Connector in the device, then connect the headphones to theunit.© 2008 Nokia. All rights reserved.26
