10. Dangerous area covers 20 metres, in falling head use 50 metres. Take notice of thedangerous area also when using accessories, take care that there is nobody staying inthe dangerous area, observe especially children.11. Never leave the loader (with or without a load) so that the booms are hanging in the airif the loader is not watched over by yourself.12. Do not use loose or torn clothes.13. Never go under the booms or load. Operate the loader only from the cab of the tractor.14. Observe safety distances from live electric conductors when using the machine.15. After the first hour of operation, check all screws and nuts for tightness. Perform thischeck from time to time even later.16. Inspect the hydraulic system to detect any leakages during operation, repair any faultsimmediately. Do not let oil leak out and pollute the environment.17. When mounting the valve block you have to notice that it is not allowed for pressurizedhydraulic hoses to be located in the cab without any protection.18. Use only original spare parts.19. The controls of the loader have to be placed into the cab, which fulfils the requirements.20. It is forbidden to loose support legs from the transport package before the loader isfitted to the lower arms of the tractor, the loader looses the stability.21. Allways use support legs while using the loader.22. Before starting to work be sure that the combination is stable against tipping. At the endof this booklet, a calculation instruction for stability determination exists.23. Use only original accessories.NOISE REDUCTIONContinual noise may cause hearing problems and even a loss of hearing. The noise levelon the working place depends on noise isolation and way of mounting valves. Use suitableear protectors or ear plugs that have a sufficient noise damping capacity.When servicing the hydraulic system, use gloves to protect your skin against oil.