Norac UC4 Installation Manual

Also see for UC4 Total Control: Operator's manual Installation manual Installation manual Installation manual Installation manual

Contents

Norac UC4 Installation Manual Manual pdf 20 page image

184.4 Main Roll Sensor and Target Installation4.4.1 The Mounting BracketsThe brackets are designed to be very flexible and allow for a wide range ofinstallations.Figure 11 – Target BracketThe Target Bracket (Item B12) can be mounted in any direction around most sizesof sprayer frame member and aimed using two ball and socket connections. Thedual ball connection also allows for a few inches of height adjustment whileallowing the rod to remain horizontal.Figure 12 – Sensor BracketThe Roll Sensor Bracket (Item B11) can be mounted in any orientation on most anyframe member. The base can be mounted horizontal or vertical and be rotatedabout 20 degrees. The tube can slide in and out of the base and be rotated to give agreat deal of mounting options. The mounting collar can also be slid along the tubeand rotated. The mounting tab can rotate perpendicular to the collar giving fullrange of motion allowing the sensor to point directly towards the ground no matterthe angle or direction of the tube.