Norac UC4 Plus Installation Manual


Contents Table Of Contents INTRODUCTION GENERAL SYSTEM DESCRIPTION INSTALLATION PROCEDURE General mounting rules for UC4+ ultrasonic wing sensors Suggested Mounting Location for Wing Bracket on HSA Boom Suggested Mounting Location for Wing Bracket on HSS Boom Control Panel Mounting Cable Installation RAU Valve Connections check	94.3.3 Suggested Mounting Location for Wing Bracket on HSS BoomUse the square bracket mounting plate and the included hardware to mount the UC4 bracketto the HSS boom, as illustrated.Figure 11: HSS BoomMount the UC4 bracket to the HSS boom as shown below, inside of the break-away section.Figure 12: Sensor Mounted to HSS BoomBreakaway sectionNORAC hardware Previous Next / 27