Norac UC4+ Apache 2010+ Installation Manual

244.8 COMPLETING THE I NSTALLATION1. Start up your sprayer and test thesprayer’s functionality. The NORACControl Panel does not need to bepowered up for the original switches tofunction. Unfold the booms andraise/lower each boom and mainsection.Confirm that the cabling/hosesare agreeable to the entire rangeof motion.2. If any functions do not work, review thehydraulic and electrical portions of thismanual to check for proper installation.If you still have trouble, contactNORAC for assistance.3. Turn on the power for the UC4+Control Panel using the switch on theside of its chassis.4. Repeat the Boom Speed Test asdescribed in Section 4.2 Boom SpeedTest with the NORAC UC4+ SprayHeight Control system installed.Record the results for comparison inTable 5.5. The procedure for the installation of theUC4+ Spray Height Control system isnow complete. Begin the AUTOMATICSYSTEM SETUP procedure as describedin the UC4+ Sprayer Boom ControlOperator’s Manual (M01).