Analog Input SmartLeadP-811 Rev B (May 2019)24SmartLead is disconnected or loose Check that the SmartLead is inserted FullyFirmware in the Sensor is outdated. The EMGSensor Status LED may be solid Yellow.Sensor firmware is periodically updated tosupport newly designed SmartLeads. Makesure you have installed the latest version ofMR3 and run a firmware update if needed.12.1 Website Link to FAQAnswers to common questions can be found at Noraxon’s Frequently Asked Questions (FAQ)website page at this link:https://www.noraxon.com/support-learn/technical-support/faqs/Other educational material is available at this link:https://www.noraxon.com/support-learn/technical-support/