BIS-6330A Digital Signage Player16Chapter 4 BIOS SETUPAMI BIOS FlashBIOS functions as a bridge connecting hardware and operating system. Hardware andsoftware are upgrading all the time, so when your system goes wrong, for example, yoursystem can not support the newest CPU, you need to upgrade BIOS to keep up with the latesttechnology.AFUEFI.EXE is the FLASH IC program for BIOS to upgrade, which needs to be run in DOSmode.Please use a boot disk to load DOS, then run AFUEFI.EXE to upgrade BIOS（ for example:write XXXX.ROM into FLASH IC ）Specific Command: C:\ AFUEFI ****.rom /P /B /N /X or C:\FPT -F ****.BIN –BIOSIf you need to add other parameters after the order format, please add /?Remark:1. BIOS upgrading is only executed when it is necessary.2. Please use the BIOS SETUP Utility in the CD-ROM provided by us or downloads the latestversion on related websites.3. Please do not power off or reboot the system during BIOS upgrading, otherwise, the BIOSmaybe be damaged or system may not be able to boot again.4. After BIOS flash, please manually Load Default to optimize BIOS settings.5. Please backup your BIOS in advance.AMI BIOS DescriptionWhen the computer is power on, BIOS will conduct self-diagnosis to its hardware onmotherboard and configure hardware parameter; finally the operating system will take control.BIOS is the communication bridge between hardware and O/S. Correct configuration of BIOSis critical for maintaining system stability and its optimized performance.BIOS Settings1. Power on or reboot the computer, self-detection information will show:2. When message shows as "Press to enter setup"，pls press , then enter intoBIOS SETUP Program.
