Norcold 2117 Installation Manual

Also see for 2117: Owner's manual Parts list Owner's manual

Contents

Norcold 2117 Installation Manual Manual pdf 11 page image

Installation Manual 11Install the Baffles for an Upper Side-Wall Exhaust VentCAUTION: Make sure that all horizontal baffles are the full width ofthe inside of the enclosure and are in the correct location. If thebaffles are not the full width of the enclosure or incorrectly located,poor cooling performance can result.If the enclosure depth is 24 inches or more and less than 26 inches (SeeArt01806):- Install a wood, aluminum or galvanized steel top baffle [13] between thetop of the refrigerator and the top of the upper exhaust vent [24].- Make sure that the top baffle is less than 1/4 inch [15] from the top ofthe refrigerator and baffle overlaps the refrigerator 1 inch or less.- Make sure that the baffle is against the wall of the vehicle at the topof the upper exhaust vent and less than 1/4 inch above the openingfor the upper exhaust vent.- Install an aluminum or galvanized steel bent-sheet condenser baffle[26].- Make sure that the bend of the condenser baffle is the full width ofthe inside of the enclosure.- Make sure that the bend of the condenser baffle is flush with thebottom edge of the door frame of the upper side-wall exhaust vent.- Make sure that the top edge of the condenser baffle is 1/4 inch orless [15] from the lower rear corner of the condenser.!Art0180615 1315152426259